Arduino LilyPad USB

The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the ATmega32U4. Board comes fully assembled and tested with ATMega168V pre-loaded with bootloader.

Microcontroller	ATmega32u4
Operating Voltage	3.3V
Input Voltage (recommended)	3.8V
Input Voltage (limit)	5V
Digital I/O Pins	9
PWM Digital I/O Pins	4
Analog Input Pins	4
DC Current per I/O Pin	40 mA
Flash Memory	32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM	2.5 KB (ATmega32u4)
EEPROM	1 KB (ATmega32u4)
Clock Speed	8 MHz
Radius	18 mm

RASPBERRY PI 2 MODEL B

The Raspberry Pi 2 Model B is the second generation Raspberry Pi. It replaced the original Raspberry Pi 1 Model B+ in February 2015. Compared to the Raspberry Pi 1 it has:

• A 900MHz quad-core ARM Cortex-A7 CPU
• 1GB RAM

Like the (Pi 1) Model B+, it also has:

• 4 USB ports
• 40 GPIO pins
• Full HDMI port
• Ethernet port
• Combined 3.5mm audio jack and composite video
• Camera interface (CSI)
• Display interface (DSI)
• Micro SD card slot
• VideoCore IV 3D graphics core